技術參數
適用要求高的防水錘管道，可承受較大壓差。
TECHNICAL PARAMETERS
Flow come from below seat, avoid water hammer, suitable for higher pressure difference.
| 規格 Size |
接口 Thread |
內孔 Orifice(mm) |
流量值 Kv(m³/h) |
執行器 Actuator(mm) |
壓差范圍 △P(MPa) |
控制壓力 Control pressure(MPa) |
| DN10 | G3/8" | 13 | 3.8 | 50 | 0-1.6 | 0.6-0.8 |
| DN15 | G1/2" | 13 | 4.7 | 50 | 0-1.6 | 0.6-0.8 |
| 50 | 0-1.6 | 0.6-0.8 | ||||
| DN20 | G3/4" | 18 | 9.5 | 50 | 0-1.6 | 0.6-0.8 |
| DN25 | G1" | 24 | 18.1 | 50 | 0-1.6 | 0.6-0.8 |
| 63 | 0-1.6 | 0.6-0.8 | ||||
| DN32 | G1 1/4" | 32 | 23.1 | 63 | 0-1.6 | 0.6-0.8 |
| 80 | 0-0.6 | 0.6-0.8 | ||||
| DN40 | G1 1/2" | 35 | 32.9 | 80 | 0-1.6 | 0.6-0.8 |
| 100 | 0-1.6 | 0.6-0.8 | ||||
| DN50 | G2" | 45 | 52.8 | 80 | 0-0.8 | 0.6-0.8 |
| 100 | 0-1.6 | 0.6-0.8 | ||||
| DN65 | G2 1/2" | 60 | 90 | 80 | 0-1.2 | 0.6-0.8 |
| 100 | 0-1.6 | 0.6-0.8 |
© 2021 溫州遠歐機械科技有限公司 備案號：浙ICP備15041805號-2 技術支持：喬宇科技
